Product Overview
HRP is a glycoprotein composed of a colorless enzyme protein and a dark brown iron porphyrin (heme) cofactor. Its molecular weight is approximately 44 kDa. The molecular structure of HRP consists of a polypeptide chain of about 33.9 kDa, a heme of about 700 Da, and a carbohydrate of about 9.4 kDa (accounting for approximately 18%).
The purity of HRP is usually measured by the RZ value (Reinheitszahl), which is the ratio of the absorbance of heme at 403 nm to the absorbance of the enzyme protein at 275 nm (A403/A275). The RZ value of highly pure HRP is typically around 3.0, but it only reflects the heme content and does not directly indicate the level of enzyme activity.
Basic Product Information
| Product name | Peroxidase(Horseradish)HRP |
| Synonym | Peroxidase froM horseradish(EIA Grade,Purified);84 kDa myeloperoxidase;89 kDa myeloperoxidase;ANTI-MYELOPEROXIDASE(N-TERMINAL) antibody produced in rabbit;Myeloperoxidase light chain;Apoperoxidase |
| CAS NO. | 9003-99-0 |
| Appearance | Brown to red-brown lyophilized powder |
| Specification: | RZ>2.5 enzyme activity > 250u/mg |
| MF | / |
| MW | / |
| Related categories | Enzymes and coenzymes; Amino acids; Enzymes; Diagnostic reagents; Biochemistry; Proteomics; Enzyme immunoassay colorants series |
| Transport Information | Non-dangerous goods |
| HS Code | 3504009000 |
| Application | It is used in biochemical research and is one of the main enzymes used in the enzyme labeling method. In medicine, it is used to measure the content of glucose and galactose in biological fluids and is used as a diagnostic enzyme. |
| Packaging | 1.0g/bag,30g/bag;1.0kg/bag |
| Contact Info | lucy@coreychem.com |
Frequently Asked Questions (FAQ)
1.What does the RZ value of HRP represent? Does a higher RZ value mean stronger enzyme activity?
The RZ value (Reinheitszahl) is the ratio of the absorbance of the heme cofactor of HRP at 403 nm to the absorbance of the enzyme protein at 275 nm (A403/A275), which only reflects the heme content and does not represent the level of enzyme activity. The RZ value of highly pure HRP should be around 3.0 (up to 3.4), but in immunolabeling, the RZ value has no relation to enzyme activity and enzyme activity is expressed in units of U. When choosing HRP products, it is recommended to consider enzyme activity first, and then refer to the RZ value.
2.What is the optimal reaction pH and temperature for HRP? How stable is it?
The optimal pH range for HRP is 6.0–6.5 (with activity approximately 84% of the maximum at pH 7.5), and it is most stable within the pH range of 5.0–9.0. The suitable temperature is 40–45℃. In terms of thermal stability, at pH 6.0, the activity remains stable for 10 minutes at temperatures below 50℃.
3.What types of substrates can HRP catalyze? How to choose?
HRP can catalyze various types of substrates, mainly including three categories: chromogenic substrates (such as TMB, DAB, ABTS, OPD), chemiluminescent substrates (such as Luminol and isoluminol), and fluorescent substrates (such as tyramine, high vanillin acid, and 4-hydroxyphenylacetic acid). Among them, TMB is widely used in ELISA and Western Blot due to its high sensitivity and non-carcinogenicity; DAB is often used in immunohistochemistry because it can form a stable colored precipitate; chemiluminescent substrates are suitable for detection scenarios requiring extremely high sensitivity.
4.How should the HRP conjugate be stored? Will repeated freeze-thawing affect its activity?
The freeze-dried powder of HRP can be stored at -20℃ for 3 years, and the enzyme activity can be maintained for at least 2 years at 2–8℃. The solution form of HRP can retain its activity for approximately one year under refrigeration conditions. For HRP conjugates, repeated freeze-thawing should be avoided. After re-dissolving with HRP stabilizer, the peroxidase activity can be maintained for up to 2 years at 2–8℃. If long-term storage of the working concentration of HRP conjugates is required, it is recommended to use a dedicated stabilizer and store in aliquots.
5.How is the enzyme activity unit of HRP defined?
The enzyme activity unit of HRP is defined as follows: at 20℃ and pH 6.0, after reacting for 20 seconds, to oxidize resorcinol and obtain 1.0 mg of reddish-brown phenol, the amount of enzyme required is defined as one unit of activity. This unit is approximately equal to 18 μM per minute at 25℃. The specific activity of high-purity HRP is usually ≥ 250 U/mg, and some high-purity products can reach ≥ 340 U/mg.
Applications
Typical Applications of HRP in Biomedical Testing
Laccase Peroxidase (HRP), with its small molecular weight, high stability, and wide substrate compatibility, has become a core labeling enzyme in ELISA, Western Blot, immunohistochemistry, chemiluminescence detection, and signal amplification, among other fields. The following presents the practical application value of HRP through five specific application scenarios.
Case 1: Highly Sensitive Detection of HPV E6 RNA Using PolyHRP Signal Amplification
Lin et al. developed a sandwich direct enzyme-linked immunosorbent assay based on streptavidin-polyHRP for the detection of HPV16/18 E6 RNA. This study combined the specificity of the S9.6 antibody against DNA-RNA hybrids with the signal enhancement ability of SA-polyHRP, achieving a detection limit of 1.03 pM (0.012 pg/μL), a 59.6-fold improvement in sensitivity compared to the indirect method using monomeric HRP-labeled secondary antibodies, and obtaining an acceptable recovery rate of 76–108% in artificial plasma samples -29.
Case 2: Application of Tyramine Signal Amplification (TSA) Technology in Tissue Immunofluorescence
Tyramine signal amplification (TSA) is based on HRP converting the labeled tyramine substrate into highly active free radicals in the presence of low concentrations of H₂O₂. These free radicals covalently bind to tyrosine residues in adjacent protein molecules. Compared to traditional methods, the TSA method can increase the sensitivity of target molecule immunofluorescence detection by more than 100 times, especially suitable for detecting low-concentration targets. Since the binding of tyramine labels is covalent, different dyes of tyramine can be used for multiple rounds of TSA staining to achieve the detection of multiple targets in the same sample -16.
Case 3: Protein Expression Analysis in Western Blot Using HRP-Labeled Secondary Antibodies
In the study of the expression regulation of androgen receptor, estrogen receptor α, and progesterone receptor in the brain tissue of male rabbits, the research team used mouse IgGκ light chain binding protein labeled with HRP as the secondary antibody and incubated at room temperature for 1 hour. Signal detection was performed using SuperSignal West Femto chemiluminescent substrate, and the immune reaction signal was captured using X-ray film -73. This method successfully achieved quantitative analysis of the expression of multiple steroid hormone receptor proteins in different regions of the brain tissue.
Case 4: Antigen Localization Detection in Immunohistochemistry Using HRP-DAB System
In the immunohistochemical study of ERβ and NANOG expression in thyroid papillary carcinoma tissues, researchers used the Biotin-Streptavidin HRP detection system and DAB staining kit. After tissue sections were dewaxed, antigen-repaired, and peroxidase blocked, they incubated with the primary antibody at 4°C overnight, followed by incubation with HRP-labeled anti-rabbit IgG secondary antibody for 30 minutes, HRP incubation for 20 minutes, and finally DAB staining and hematoxylin counterstaining -83. Through scoring the staining intensity and positive cell ratio, a semi-quantitative assessment of target protein expression was achieved.
Case 5: Chemiluminescence Immunoassay Sensor Based on AuNP-PolyHRP Conjugate
In the research on the high-sensitivity detection of cardiac troponin I (cTnI), researchers constructed a detection conjugate consisting of 15 nm gold nanoparticles (AuNP), PolyHRP-streptavidin, and biotinylated antibodies. PolyHRP significantly enhanced the generation of chemiluminescence signals by increasing the number of active enzymes on each conjugate. Compared to the chemiluminescence signals of conventional HRP conjugates, the detection sensitivity of AuNP-PolyHRP-antibody conjugates was increased by approximately 210 times; Compared with the colorimetric signal of AuNP, the sensitivity has increased by approximately 3400 times – 99.
Packaging & Storage Specifications
Safety and Storage
Packaging: 1.0g/bag, 30g/bag; 1.0kg/bag
Safety Operating Procedures
When handling HRP powder, it should be done in a fume hood to avoid inhaling dust. Protective gloves, protective clothing, protective goggles and a protective mask should be worn. After use, contaminated clothing should be immediately replaced, skin protection lotion should be applied, and hands and face should be washed and rinsed. Eating and smoking are prohibited in the handling, storage and processing areas. In case of inhalation exposure, the patient should be moved to a fresh air area; if breathing symptoms occur, medical attention should be sought immediately. HRP powder should be avoided from being released into the environment as it is harmful to aquatic organisms.
Storage conditions
Dry powder form: HRP dry powder should be stored at -20℃ with a shelf life of up to 3 years; it can also be stored at 2–8℃, and the enzyme activity can be maintained for at least 2 years. Some product instructions recommend freezing storage under inert gas (<0℃) and avoiding contact with air, moisture and heat.
Solution form: HRP solution can be stored for up to one year under refrigeration and its activity is almost unchanged. If the HRP conjugate stabilizer is used to re-suspend the freeze-dried HRP conjugate, the peroxidase activity can be maintained for up to 2 years at 2–8℃.
HRP conjugate: It is recommended to store at below -20℃, avoiding repeated freeze-thaw cycles. The HRP conjugate at working concentration is recommended to be stored with a dedicated stabilizer at 2–8℃, avoiding repeated freeze-thaw cycles to prevent loss of activity.
Transport and packaging
HRP products should be stored in the original container, keeping the container sealed, avoiding direct sunlight, placed in a dry, cool and well-ventilated area, away from prohibited items, food and beverages. During transportation, avoid high temperatures and violent shocks.
Product Manager Information
Product Manager: Lucy Yao
Email: lucy@coreychem.com